X-10 120 Volt Wall Outlet Control Module

Wall receptacle with an appliance module built in. Can turn devices plugged in to the module on or off.

Be 1st to review

X-10 Alarm Module

The alarm control module (CM506) contains an piezo sounder (beeper) which is used to indicate out of range conditions in the aquarium. This control module also has an isolated contact relay which can be used to open and close circ...

Be 1st to review

X-10 Control Interface Hardware

The control interface hardware module (IM513) plugs into a standard 120V AC socket and connects to the base unit with a ten foot cable. The AquaController sends on, off and dim commands to the control interface module which then t...

Avg. Customer Review (3) reviews

X-10 Heavy Duty Wall Receptacle Control Module (125V @ 20A) for Octopus Controller

By receiving command signals from the X-10 Powerline Interface, the Control Modules open/close relay contacts to turn external devices (heaters, chillers, lights, etc.) on or off. Control Modules are configured with a unique X-10 ...

Be 1st to review

X-10 Lamp Control Module

This module is used to simulate the moon cycle with an incandescent bulb. This control module responds to both on, off and intensity commands sent from the AquaController. This module is can only be used with incandescent lamps of...

Avg. Customer Review (2) reviews

X-10 Pro Control Module

By receiving command signals from the X-10 Powerline Interface, the Control Modules open/close relay contacts to turn external devices (heaters, chillers, lights, etc.) on or off. Control Modules are configured with a unique X-10 ...

Be 1st to review

X-10 Pro Powerline Interface Module

Pro Powerline Interface Module for Octopus Controllers The Pro Powerline Interface Module plugs into a standard 120V AC socket and connects to the Octopus unit with a ten foot cable. The Octopus controller sen...

Be 1st to review

X-10 Terminal Control Module - AM466 (3-PIN)

The 3 terminal control module (AM466) is general purpose control module which includes the ground pin. It can be used for switching resistive as well as inductive loads. Uses include heaters, chillers, lighting systems, pumps, and...

Be 1st to review

X-10 XPPF Plug-in Noise Filter

Certain devices such as electronic ballasts and large motors can generate sufficient EMI to effect reliable X-10 operation. A simple way to filter out this noise is with the Plug-in Isolator. Simply plug the problem device into th...

Be 1st to review